空气增压泵优点:
The advantages of air pressurized pump:
1.接进低压压缩空气直接增加压力。
1. into the low pressure compressed air directly increase the pressure.
2.达到终压力后不再消耗能量。
2. the energy is no longer consumed after the ultimate pressure is reached.
3.能够用于危险的工作环境中。
3. can be used in a dangerous working environment.
4.空气增压泵适用于需要使原空压系统提高压力的工作环境中,能够提高车 间供气系统的压力增加比例为:2:1/3:1/4:1/5:1/6:1/7:1/8:1/10:1/15:1/25:1/40:1等仅需将工作系统内的压缩空气作为气源即可。
The 4. air pressurized pump is suitable for the working environment that needs to increase the pressure of the original air pressure system. The increase of pressure in the air supply system of the workshop is as follows: 2:1/3:1/4:1/5:1/6:1/7:1/8:1/10:1/15:1/25:1/40:1 and so on, only the compressed air in the working system should be used as the gas source.
空气增压泵应用:
Air pressurized pump application:
1.主要用于工厂压缩空气的二级增压,可以方便解决工厂压缩空气气源压力不足的问题,空气压力可由1-8kg增压至2-100 kg等更高的压力。
1. is mainly used for the two stage pressurization of the compressed air in the factory, which can easily solve the problem of the shortage of the pressure of the compressed air source in the factory. The pressure of the air can be pressurized from 1-8kg to 2-100 kg.
2.散热器、冷却管、阀门、压力容器、管路等产品的耐压和气密性试验,以及其他多种用途。
2. pressure test and tightness test of radiator, cooling pipe, valve, pressure vessel and pipeline, and many other uses.
空气增压泵使用介质:
Air pressurized pump using medium:
1.压缩空气、氮气、二氧化碳、氧气、冷媒、氩气、氦气、氖气、氪气、氙气等气体。
1. compressed air, nitrogen, carbon dioxide, oxygen, refrigerant, argon, helium, neon, krypton, xenon and other gases.
空气增压泵范围:
Air pressurized pump range:
1.气动夹具,模具,热流道,机械手臂,CNC气动夹刀头,气缸,吹瓶机,激光切割机,数控加工中心,电子厂,机械厂,毛纺厂,织布厂等各种气动设备压力不足的增压和稳压作用及各种破坏性压力测试,气体较大压力可增压到260mpa。
1. pneumatic clamp, mold, hot runner, mechanical arm, CNC pneumatic clip tool head, cylinder, bottle blows machine, laser cutting machine, CNC machining center, electronic factory, machinery factory, wool textile factory, weaving factory and other various pneumatic equipment pressure and stable pressure and various destructive pressure tests, the maximum pressure of gas can be pressurized to 260mpa.