After the gas booster pump is operating for a long time, we will stop filling and exhaust gas pressure pump, so that the gas booster pump may be abnormal operation, this point must be paid attention to.

注油枪的罗纹接口处，要与注油嘴停止链接，而且要手动拧紧。补油时必要将没有气泡的油，注入到从U孔中溢出的水平。另有不克不及让气体增压泵内存有气泡，一般用一些对象让油冒出才行。排气的螺栓要轻微拧松一些，让油溢出，当没有气泡后，再拧紧。气体增压泵的时候活塞在装置时，也必要留意一定的补油规矩，当咱们写下排气盖板时，要留意保险钢丝能否有成绩。操纵注油抢时，也要留意不要将补油软管内存留氛围，要确保外面没有氛围。一定要确保气体增压泵的排气盖盖好。

The ribbed interface of the oil filling gun must be linked with the oil injecting nozzle and manually tightened. When oil is added, it is necessary to pour oil without bubbles into the overflow level from the U hole. Otherwise, the gas booster pump can not be filled with bubbles. Generally, some objects are allowed to emit oil. The exhaust bolts should be slightly loosened to make the oil overflow and tighten without bubbles. When the piston in the gas booster pump is in the device, it is necessary to pay attention to the certain rules of the oil filling. When we write down the exhaust cover plate, we should pay attention to the results of the insurance steel wire. When you control oil filling, you should also pay attention not to keep the oil hose in memory, so as to ensure that there is no atmosphere outside. Make sure that the exhaust cover of the gas booster pump is properly covered.

当气体增压泵事情时，活塞要水平装置，这也必要一定的规矩，卸下保险钢丝的排气盖板，这也是必要留意颐养的处所。当操纵注油枪时，要留意软管内不要有氛围存留。实在这个规矩与上述规矩相似，重要便是为了可以或许让气体增压泵加倍寿命久长。

When the gas booster pump things, the piston to the horizontal device, this is also necessary rules, unload the insurance steel wire exhaust cover plate, this is also necessary to pay attention to the place to take care of. When operating the oil gun, keep in mind that there should be no atmosphere in the hose. In fact, this rule is similar to the above rules. The important thing is to make the gas booster pump life longer.

补油的规矩很牢固，气体增压泵的排气盖板必要常常的移动，也必要留意在运转前检查能否盖好。当咱们使用时，一定要留意到顶点，气体增压泵厂家提醒气体增压泵的油表唆使能否失常，能否漏油，注油枪软管的罗纹接口处，能否手动拧紧了，另有外部能否有气泡，这些只需留意到位，基本上就没什么效果了。当油表的唆使精确后，才可以或许确认补油停止。

The rules of filling oil are very firm. The exhaust cover of gas booster pump must move frequently. It is also necessary to pay attention to whether the lid can be covered before operation. When we use it, we must pay attention to the vertex, the gas booster pump manufacturers remind the gas pressure pump oil abetle can be abnormal, oil leakage, the oil injection gun hose rib interface, the manual tightened, and the external can have bubbles, these need to be noticed in place, it has no effect on the base. When the oil meter is instigated accurately, it is possible to confirm that the oil stop.