1。输入压开云在线官方：较大压力可达560Mpa
1. High input pressure: maximum pressure up to 560Mpa
2。运用规模广：任务介质可为液压油。水及大局部化学侵蚀性液体，而且牢靠性高，免保护寿命长。
2. The scope of application is wide: the task medium can be hydraulic oil. Water and most of the chemical corrosive liquids, and high reliability, long life without protection.
3。输入规模广：对一切型号泵仅需较吝啬压就能颠簸任务，此时取得较小流量，调理进气量后可取得不同流量。
3. Wide input scale: For all types of pumps, the task can be bumped only with less pressure. At this time, small flow can be obtained, and different flow can be obtained by adjusting the intake.
4。运用灵巧：选用不同型号的泵，可取得不同的压力区域。
4. Dexterity: different types of pumps can be used to obtain different pressure areas.
5。易于调理：在泵的压力规模内，调理调理阀从而调理进气压力，输入液压相应相应得到无极调剂。
5. Easy to adjust: In the pressure scale of the pump, adjust the adjusting valve to adjust the intake pressure, and the corresponding input hydraulic pressure to get endless adjusting.
6。主动保压：无论何种起因形成保压回路压力降落，将主动启动，弥补走漏压力，维持回路压力恒定。
6. Active Pressure Maintenance: Whatever the cause of pressure drop, it will actively start up to make up for leakage pressure and maintain constant pressure in the circuit.
7。操作平安：采取气体驱动，无电弧及火花，可在风险场合运用。
7. Operation safety: gas drive, no arc and spark can be used in risk situations.
8。保护简朴：与其余气驱泵相比，增压泵可实现雷同的任务，但其零件及密封少，保护简朴
8. Simple protection: Comparing with other gas drive pumps, booster pump can achieve the same task, but its parts and seals are few, and the protection is simple.
9。性价比高：增压泵是一种柱塞泵，任务时德科增压泵敏捷往停任务，随着输入压力的增高，泵的往复减慢直至停滞，此时泵的压力恒定，能量消费低，各部件停滞静止。
9. High performance-price ratio: booster pump is a plunger pump, the task of Deco booster pump agile to stop task, with the increase of input pressure, pump reciprocating slows down until stagnation, at this time the pump pressure is constant, energy consumption is the lowest, all components stagnate.
空气增压泵性能特性：
Performance characteristics of air booster pump:
1、较大任务压力可达 40 bar
1, the maximum task pressure can reach 40 bar
2、较大流量：1，350 L ÷min
2, maximum flow rate: 1350 L min
3、当到达所设定的压力时，无额定能量消费
3. There is no rated energy consumption when the pressure is set.
4、无需电源（可运用于需防爆的范畴）
4, no power supply (can be used in the category of explosion-proof).
空气增压泵原理：
The principle of air booster pump:
出口AV系列、Haskel系列空气增压泵的原理是运用大面积活塞的低气压发生小面积活塞的高液压。空气增压泵运用于原空压体系要提低压力的任务环境中，可以将任务体系的空气压力进步到2－5倍，仅须要将任务体系内收缩空气作为气源即可。该泵适宜单气源增压。
The principle of AV series and Haskel series air booster pumps for export is to use low pressure of large area piston to produce high hydraulic pressure of small area piston. The air booster pump can be used in the task environment where the original air pressure system needs to raise the low pressure. The air pressure of the task system can be increased to 2-5 times, and only the contracted air in the task system needs to be used as the air source. The pump is suitable for pressurization with single air source.
较大任务压力可达40bar
The maximum task pressure can reach 40bar
较大流量：1，350L÷min
Maximum flow rate: 1350L min
With the summary above the gas booster pump, I hope it will be helpful to our customers. If you don't understand or ask for help, please click on our official website: //keonnected.com or call for consultation. We will try our best to solve it for you.
