1.进入气体增压泵系统的气体或液体必须是纯净的经过滤的清洁高纯度气体（气动增压泵分为气体增压与液体增压）
1. The gas or liquid entering the gas booster pump system must be pure and filtered clean high purity gas (pneumatic booster pump is divided into gas boost and liquid boost)
2.增压泵前需经150目及以上过滤器进行过滤，以免造成进口通道阻塞或损坏增压泵（针对高压泵这点很重要）
2. The booster pump should be filtered by 150 mesh or more filters before operation, so as to avoid blocking or damaging the inlet passage of the booster pump (this is very important for high-pressure pumps).
3.系统配有冷却装置，如果温度过高，可以采取冷却水进行快速冷却
3. The system is equipped with cooling device. If the temperature is too high, cooling water can be used for rapid cooling.
4.进入增压泵系统气体驱动缸的空气必须是纯净的经过滤的压力稳定的气体，其压力可以通过普通调压阀进行调节（驱动气压力一般在2-8bar）
4. The air entering the gas driving cylinder of the booster pump system must be pure, filtered, pressure-stable gas, whose pressure can be adjusted by a common pressure regulating valve (the driving pressure is usually 2-8 bar).
5.进行压力调节时，首先要缓慢进行，应注意观察高压气体增压泵系统的压力表的显示压力，不要超压
5. When adjusting the pressure, we should first proceed slowly. We should pay attention to the pressure gauge display pressure of the high-pressure gas booster pump system and not overpressure.
6.增压泵要定期进行检修检查, 使用过程中应随时注意气动气体增压泵的工作压力，随时检查各高压连接处是否有松动，以免发生异常事故。
6. Booster pumps should be inspected regularly, and the working pressure of pneumatic gas booster pumps should be noticed at any time in the use process, and the loosening of high-pressure connections should be inspected at any time, so as to avoid abnormal accidents.
7.增压泵在运行过程中应对使用情况，元辅件更换情况做出详细记录，以便于以后的维修保养及事故分析
7. During the operation of the booster pump, detailed records should be made on the use and replacement of the spare parts, so as to facilitate future maintenance and accident analysis.
8.气体增压泵初次使用半年后，应对设备进行清洗增压氧气时应禁油（不可以擅自增压氧气）
8. Half a year after the initial use of the gas booster pump, oil should be prohibited when the equipment is cleaned and pressurized oxygen should be used (oxygen should not be pressurized without authorization).
