Argon Booster Pump - Gas Booster Pump is used in the condition of lack of end pressure. It only needs a common air booster to complete the pressurization of air to the required pressure. Suitable single gas source pressurization. It is mainly used in the fields of pneumatic industry, machine tool equipment industry, petrochemical industry, aerospace industry, automobile manufacturing industry, shipbuilding industry, food and gymnastics industry, pressure monitoring industry and so on. Applicable to compress air, nitrogen, helium, argon, oxygen, hydrogen, methane, natural gas and other local gas pressurization and valve, pipe fittings, condensation pipe, air conditioning coil air tightness test.

二、氩气增压泵-气体增压泵性能参数

2. Performance parameters of argon booster pump-gas booster pump

工作介质：水、液压油以及大局部化学腐蚀性液体

Working medium: water, hydraulic oil and most chemical corrosive liquids

输出压力可达140Mpa，增压比有2倍增压，5倍增压*到200倍。

The output pressure can reach 140 Mpa, the boost ratio is 2 times, the boost ratio is 5 times * 200 times.

气体输入口压力范围为

Gas Input Pressure Range

驱动气压≤

Driving Pressure <

流量：

Flow rate:

）工作原理：紧缩空气驱动大面积端活塞，小面积端得到高压气体输出。

) Working Principle: Compact air drives large area end piston, small area end gets high pressure gas output.

三、氩气增压泵-气体增压泵的特性

Characteristic of Argon Booster Pump-Gas Booster Pump

（1）适用范围广。工业范畴用于机床卡盘的卡紧，蓄能器充气，高压瓶充气，降低压气体转换成高压气体等。但凡气源压力不够高，无论是机械或测试安装，均可采用思明特气体增压器。

(1) Wide scope of application. Industrial applications include clamping of machine tool chucks, inflating accumulators, inflating high-pressure bottles, converting low-pressure gases into high-pressure gases, etc. However, whenever the pressure of the gas source is not high enough, whether mechanical or test installation, Smitter gas supercharger can be used.

（2）多种气源驱动：紧缩空气、氮气等均可作为驱动气源

(2) Various kinds of gas source driving: compressed air, nitrogen and so on can be used as driving gas source.

（3）应用灵敏：多种型号可选，选用不同型号的泵，压力区域也不同

(3) Application sensitivity: Various types of pumps can be selected, different types of pumps can be selected, and the pressure area is also different.

（4）整台泵采用铝合金及不锈钢制造，运用寿命长

(4) The whole pump is made of aluminium alloy and stainless steel with long service life.

（5）自动保压：无论何种缘由形成保压回路降落，将自动补充走漏压力，坚持回路压力恒定。

(5) Automatic Pressure Maintenance: No matter what reason the pressure retaining circuit falls, it will automatically supplement the leakage pressure and insist that the pressure of the circuit is constant.

（6）可长时间保压不耗费能量，保压时介质不会产生过热现象，延长介质运用寿命。

(6) Pressure can be maintained for a long time without consuming energy. When pressure is maintained, the medium will not overheat and prolong the service life of the medium.

本文由气体增压泵提供技术支持，更多的详细精彩内容请点击我们的官方网站//keonnected.com ，我们将会全心全意为您提供满意的服务。

This article is supported by gas booster pump. For more details, please click on our official website //keonnected.com. We will provide you with satisfactory service wholeheartedly.