开云在线官方

网站公告:

新闻中心

开云在线官方(中国)有限公司官网

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址://keonnected.com

企业动态

当前位置:首页 - 新闻中心 - 企业动态 - 气液增压泵内部进水是什么

气液增压泵内部进水是什么原因?

发布时间:2018-10-28 17:24:28   发布人://keonnected.com
  我们都知道,每一个制造业,所有需要使用高压压缩空气,所有需要使用气动增压泵(包括气体增压泵、气泵、气液增压泵,等等),气动增压泵的使用不可避免地造成问题,下面的游戏,小编气动增压泵,气体增压泵,气液增压泵)内部水的原因和解决方案。
  We all know that in every manufacturing industry, all need to use high-pressure compressed air, all need to use pneumatic booster pump (including gas booster pump, air pump, gas-liquid booster pump, etc.), the use of pneumatic booster pump inevitably causes problems, the following game, the causes and solutions of internal water of small pneumatic booster pump, gas booster pump, gas-liquid booster pump).
  气液增压泵内部进水是什么原因?
  What is the reason of water inflow in the gas-liquid booster pump?
  1、因为空气中总有水分,也就是所谓的空气湿度,经过压缩会变成过饱和状态,空气中水分的浓度经过分析压缩到一定程度后的液态水。压缩空气的含水量与空气的湿度有关。如果工厂环境过于潮湿,空气中的水分含量将超过使用标准。
气液增压泵
  1. Because there is always water in the air, that is, the so-called air humidity, after compression, it will become supersaturated. The concentration of water in the air will be liquid water after analysis and compression to a certain extent. The moisture content of compressed air is related to the humidity of air. If the factory environment is too humid, the moisture content in the air will exceed the use standard.
  2、气动增压泵(包括燃气增压泵、空气增压泵、气液增压泵等)有自己的自动水过滤塞或油箱自动水过滤塞。
  2. Pneumatic booster pump (including gas booster pump, air booster pump, gas-liquid booster pump, etc.) has its own automatic water filter plug or automatic water filter plug of oil tank.
  3、安装后未安装相应的干燥器部件或未正常运行(干燥设备发生故障,未及时检测处理)。,气动增压泵的压缩气体处理不及时,排除后仍含有大量水分,不能满足正常使用要求。
  3. After installation, no corresponding dryer parts are installed or not in normal operation (the drying equipment fails to be detected and handled in time). Finally, the compressed gas treatment of the pneumatic booster pump is not timely, and there is still a lot of water after removal, which can not meet the requirements of normal use.
  4、以后的措施还不够,在气动增压泵的气体质量要求都非常严格的生产过程中,一般会有精密的过滤器等设施,对气体进行二次作用,进一步净化,直到生产要求为止。
  4. The following measures are not enough. In the production process where the gas quality requirements of pneumatic booster pump are very strict, there are usually precise filters and other facilities to perform secondary action on the gas and further purification until the production requirements.
  本文来自:气液增压泵更多的内容请点击://keonnected.com 我们将会为您提问的问题提供一个满意的服务,欢迎您的来电!
  This article comes from: gas-liquid booster pump more content please click: //keonnected.com we will provide a satisfactory service for your questions, welcome your call!
 
新闻推荐:
空气增压泵的使用优势大揭秘! 2022-07-05
气体增压泵的生产要注意哪些环节? 2022-06-27
选择气动增压泵要从哪些方面考虑? 2022-06-19
大流量气体增压系统的使用特点 2022-06-10
气体增压泵一直被长期使用的原因? 2022-06-02
气体增压泵和液体增压泵有什么区别? 2022-05-27
气体增压泵能取代传统的机械泵、液压泵 2022-05-15
增压泵的安装必要事项! 2022-05-10
增压泵的使用维护非常简单! 2022-04-28
气体增压泵的使用方法及注意事项: 2022-04-20

13188935873