开云在线官方

网站公告:

新闻中心

开云在线官方(中国)有限公司官网

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址://keonnected.com

企业动态

当前位置:首页 - 新闻中心 - 企业动态 - 氮气增压泵如何降温的你知

氮气增压泵如何降温的你知道吗?

发布时间:2018-12-09 18:54:59   发布人://keonnected.com
  氮气增压泵中氮气压缩室与空气驱动室的分离是通过三级动态密封装置实现的。两个房间之间的部分与空气相通。该方案保证了压缩氮气不被驱动气体污染。氮气增压器充分利用了做功后驱动气体的显著降温。
  The separation of the nitrogen compression chamber and the air driving chamber in the nitrogen booster pump is realized by three-stage dynamic sealing device. The part between the two rooms communicates with the air. The scheme ensures that the compressed nitrogen is not polluted by the driving gas. The nitrogen supercharger makes full use of the significant cooling of the driving gas after work.
  排出的低温驱动气体作为冷却剂进入增压器自己的冷却u形管,u形管用来冷却高压输出气体和增压泵的钢套。这不仅保证了高压输出气体接近增压装置6℃的温度,而且避免了电制冷的刺耳噪音。
气液增压泵
  The discharged low-temperature driving gas enters the supercharger's own cooling U-tube as the coolant, which is used to cool the high-pressure output gas and the booster pump's steel sleeve. This not only ensures that the high-pressure output gas is close to the temperature of 6 ℃ of the supercharger, but also avoids the harsh noise of the electric refrigeration.
  氮气助力器驱动部分:调节氮气驱动时,泵可靠工作温标为-15℃~ +65℃。但当供气露点小于-55℃时,泵的固体工作温标为-35℃至+65℃的氮气压缩部分:低温一般对氮气增压器压缩部分的规格零件和密封工作没有影响。
  Driving part of nitrogen booster: when adjusting the nitrogen driving, the reliable working temperature of the pump is - 15 ℃ ~ + 65 ℃. However, when the dew point of air supply is less than - 55 ℃, the solid working temperature of the pump is the nitrogen compression part of - 35 ℃ to + 65 ℃: low temperature generally has no effect on the specification parts and sealing work of the compression part of the nitrogen supercharger.
  收缩时产生的热量有助于抵消寒冷。这部分的均匀可用温度是115℃(240?F).由于氮气加压系统配有开云在线官方度烘干机,故气封试验站温度35℃,湿度95-98%,高压气体出口露点小于-65℃。
  The heat generated when shrinking helps to counteract the cold. The maximum uniform usable temperature of this part is 115 ℃ (240? F). Since the nitrogen pressurization system is equipped with high-precision dryer, the temperature of the gas seal test station is 35 ℃, the humidity is 95-98%, and the dew point of the high-pressure gas outlet is less than - 65 ℃.
  以上是气液增压泵厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站://keonnected.comThe above is the relevant content introduced by the gas-liquid booster pump manufacturer. For more information, please visit the website: //keonnected.com
新闻推荐:
空气增压泵的使用优势大揭秘! 2022-07-05
气体增压泵的生产要注意哪些环节? 2022-06-27
选择气动增压泵要从哪些方面考虑? 2022-06-19
大流量气体增压系统的使用特点 2022-06-10
气体增压泵一直被长期使用的原因? 2022-06-02
气体增压泵和液体增压泵有什么区别? 2022-05-27
气体增压泵能取代传统的机械泵、液压泵 2022-05-15
增压泵的安装必要事项! 2022-05-10
增压泵的使用维护非常简单! 2022-04-28
气体增压泵的使用方法及注意事项: 2022-04-20

13188935873