The working principle of the hydrogen booster pump is similar to that of the pressure supercharger. The large diameter air drives the piston to generate a very low pressure, which will generate a high pressure when applied to a small area of the piston. The booster pump can be operated continuously by a two position, five gas controlled reversing valve. High pressure plunger controlled by one-way valve continuously discharges liquid. The outlet pressure of booster pump is related to the air drive pressure.

　　当驱动部分和输出气体部分之间的压力达到平衡时，增压泵将停止运行，不再消耗空气。当输出压力下降或气动压力增加时，增压泵自动启动，直到再次达到压力平衡。

　　When the pressure between the driving part and the output gas part reaches a balance, the booster pump will stop running and no longer consume air. When the output pressure drops or the pneumatic pressure increases, the booster pump starts automatically until the pressure balance is reached again.

　　一般情况下，气体增压泵采用单气控非平衡气体分配阀实现泵的自动往复运动，泵体采用铝合金制成。液体部分根据不同介质选用碳钢或不锈钢，泵密封件均采用进口优质产品，保证了气体增压泵的性能。

　　In general, the gas booster pump adopts a single air control unbalanced gas distribution valve to realize the automatic reciprocating motion of the pump, and the pump body is made of aluminum alloy. The liquid part is made of carbon steel or stainless steel according to different media, and the pump seals are made of imported high-quality products to ensure the performance of the gas booster pump.

　　我相信我们基本上了解氢气增压泵找到的工作原理,再小编提醒消费者在购买气动增压设备必须选择良好的声誉,客户反馈评价较高的公司购买,避免不必要的麻烦在未来使用。

　　I believe that we basically understand the working principle of the hydrogen booster pump, and then remind consumers to choose a good reputation when purchasing pneumatic booster equipment. The company with high customer feedback and evaluation should purchase it to avoid unnecessary trouble in the future.

　　本文来源：//keonnected.com，转载请注明出处。

　　Source: //keonnected.com, reprint please indicate the source.