气动增压泵利用大面积活塞端的低压气体驱动而产生小面积活塞端的高压流体。可用于压缩空气及其它气体,输出气压可通过驱动气压无级调节。那么气体增压泵的工作原理是怎样的?今天济南开云在线官方小编就带大家来了解一下:
The pneumatic booster pump uses the low pressure gas of large area piston end to drive and produce high pressure fluid of small area piston end. It can be used for compressed air and other gases. The output pressure can be adjusted steplessly by driving air pressure. So what is the working principle of gas booster pump? Today, Jinan JingTuo fluid editor will take you to know:
工作原理:气动增压泵利用大面积活塞端的低压气体驱动而产生小面积活塞端的高压流体。可用于压缩空气及其它气体,输出气压可通过驱动气压无级调节。
Working principle: pneumatic booster pump uses low pressure gas from large area piston end to produce high pressure fluid in small area piston end. It can be used for compressed air and other gases. The output pressure can be adjusted steplessly by driving air pressure.
多种气体驱动:压缩空气、液化氮气和管道氮气、水蒸气。
A variety of gas driven: compressed air, liquefied nitrogen and pipeline nitrogen, water vapor.
输出流量大:只需0.3-0.69MPa压缩空气驱动就可获得较大的输出流量。
Large output flow: only 0.3-0.69mpa compressed air drive can obtain large output flow.
自动保压:工作时,迅速往复工作,随着输出压力接近设定压力值时泵的往复运动速度减慢直至停止。并保持这个压力,此时消耗能量很小,无热 量产生,无零件运动。当压力平衡打破后,气动增压泵自动开始工作到下一个平衡。
Automatic pressure maintaining: when working, fast reciprocating work, with the output pressure close to the set pressure value, the reciprocating speed of the pump slows down until it stops. And maintain this pressure, at this time the energy consumption is very small, no heat generation, no part movement. When the pressure balance is broken, the pneumatic booster pump automatically starts to work to the next balance.
材质优良:高压部分材质为不锈钢。高压柱塞材质为不锈钢,并采用双层密封。
Good material: high pressure part is made of stainless steel. The high pressure plunger is made of stainless steel with double seal.
维护简单:气动增压泵的零件及密封少,维护简单且成本低。相同系列泵的所有"O"型圈,维修包易损部件可相互替换,大大降低了维修成本。气动增压泵出厂前已加注润滑剂,工作时无需外部润滑。
Simple maintenance and low maintenance cost. All the "O" rings of the same series of pumps and the vulnerable parts of the repair kit can be replaced with each other, greatly reducing the maintenance cost. The pneumatic booster pump has been filled with lubricant before delivery, so external lubrication is not required during operation.
1、保持液压无须消耗能量
1. Keep the hydraulic pressure without consuming energy
2、 具有防爆功能,无需电力或电线连接
2. Explosion proof, no power or wire connection is required
4、 结构小巧,重量轻,不受天气变化影响
4. Small structure, light weight, not affected by the weather
5、 易实现自动控制
5. Easy to realize automatic control
7、输出静态压力由驱动气压来调节
7. The output static pressure is regulated by the driving air pressure
8、 输出压力达80000PSI的压力
8. The output pressure reaches 80000 psi
9、 在满负载时非常容易进行启动、停止操作
9. It is very easy to start and stop at full load
10、 易安装,操作
10. Easy to install and operate
以上就是济南开云在线官方小编为您分享的全部内容了,如果有其他疑问,欢迎通过以下联系方式或访问网站了解。
The above is Jinan JingTuo fluid small for you to share all the content, if you have other questions, welcome to contact the following or visit the website to understand.