开云在线官方

网站公告:

新闻中心

开云在线官方(中国)有限公司官网

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址://keonnected.com

企业动态

当前位置:首页 - 新闻中心 - 企业动态 - 如何调节气动液体增压泵?

如何调节气动液体增压泵?

发布时间:2020-09-24 14:48:39   发布人://keonnected.com
如何调节气动液体增压泵?对使用过气动液体增压泵的用户来说是没什么的,但是对初次使用者来说操作不当会导致被检测件因为压力过高而损坏,下面小编就给大家总结下初次使用要注意那些细节。
How to adjust the pneumatic liquid booster pump? For users who have used pneumatic liquid booster pump, it is nothing, but for first-time users, improper operation will cause damage to the tested parts due to high pressure. The following small series will summarize the details that should be paid attention to in the first use.
1.首先初次使用要确保液体增压泵是按厂方要求连接,不要用低于液体增压泵高使用压力的配件如:高压管路,卡套接头,高压开关等。
1. First of all, ensure that the liquid booster pump is connected according to the manufacturer's requirements for the first use, and do not use accessories lower than the high service pressure of the liquid booster pump, such as high-pressure pipeline, ferrule connector, high-pressure switch, etc.
2.在使用合适的配件下按使用要求以此连接好,再检查是否有泄露(液压和气压不同稍微泄露会导致压力浮动较大,再次增压会形成脉冲对产品精密部件有影响)。
2. Connect it according to the use requirements when using appropriate accessories, and then check whether there is leakage (slight leakage of hydraulic pressure and air pressure will lead to large pressure fluctuation, and re pressurization will form a pulse, which will affect the precision parts of the product).
3.在满足上述条件后再检查驱动气源是否满足使用要求,被增压的介质是否纯洁和连接好
3. After meeting the above conditions, check whether the driving air source meets the use requirements and whether the pressurized medium is pure and well connected
4.完成以上步奏后打开驱动气源,调节二连体上的压力调节阀,从压力0往高处调节至所使用压力,等液体增压泵高压出口有液体排出时证明增压缸内空气完全排出,切断驱动气源,连接被检测件再打开气源。如果检测在长时间内承压能力就不用切断气源,检测密封性2种办法:1,切断气源看压降2,保持气源畅通看渗漏。
4. After completing the above steps, open the driving air source, adjust the pressure regulating valve on the two connected bodies, and adjust it from pressure 0 to the used pressure. When there is liquid discharged from the high-pressure outlet of the liquid booster pump, it is proved that the air in the booster cylinder is completely discharged, cut off the driving air source, connect the tested parts, and then open the air source. If the pressure bearing capacity is tested for a long time, there is no need to cut off the air source. There are two methods to test the tightness: 1. Cut off the air source to see the pressure drop. 2. Keep the air source unblocked to see the leakage.
新闻推荐:
空气增压泵的使用优势大揭秘! 2022-07-05
气体增压泵的生产要注意哪些环节? 2022-06-27
选择气动增压泵要从哪些方面考虑? 2022-06-19
大流量气体增压系统的使用特点 2022-06-10
气体增压泵一直被长期使用的原因? 2022-06-02
气体增压泵和液体增压泵有什么区别? 2022-05-27
气体增压泵能取代传统的机械泵、液压泵 2022-05-15
增压泵的安装必要事项! 2022-05-10
增压泵的使用维护非常简单! 2022-04-28
气体增压泵的使用方法及注意事项: 2022-04-20

13188935873