Generally speaking, the failure of gas-liquid booster cylinder to pressurize normally does not necessarily mean that the gas-liquid booster cylinder is broken. Then, what causes the non pressurization of the gas-liquid booster cylinder? In this case, how to solve it.

气液增压缸不增压的原因及对应解决方法:

Reasons for non pressurization of gas-liquid booster cylinder and corresponding solutions:

1、阀组未调式好。检查阀组是否未调式好，如是则重新调试阀组。

1. The valve block is not well adjusted. Check whether the valve group is not well adjusted. If so, re commission the valve group.

2、调压阀已损坏，导致气源不能进入。检查调压阀是否损坏，如是则需更换调压阀

2. The pressure regulating valve has been damaged, so that the air source cannot enter. If yes, check whether the pressure regulating valve is damaged

3、对于接有调压阀或缸体接头为调速接头的气液增压缸，调整接头已处于关阀状态。检查调整接头是否已处于关阀状态，如是则重新打开速调接头

3. For the gas-liquid booster cylinder connected with the pressure regulating valve or the cylinder body joint is the speed regulating joint, the regulating joint has been closed. Check whether the adjusting connector is closed. If so, reopen the quick adjusting connector

以上就是今天带给大开云在线官方知识，气液增压泵专注行业多年，为用户不断的提供有价值的内容，更多内容请继续关注我们：//keonnected.com

The above is the knowledge brought to you today. The gas-liquid booster pump has focused on the industry for many years and continuously provides users with valuable content. Please continue to pay attention to us for more content: //keonnected.com