在使用气体增压泵的时候，要更深入的从气源压力、运作换向声音、压力表显示等等进行说明，这样有助于更好的使用该设备进行工作，当然这里的内容仅供参考，您要根据实际情况去使用。下面来看看吧。
When using the gas booster pump, it is necessary to explain more deeply from the air source pressure, operation reversing sound, pressure gauge display, etc., so as to better use the equipment for work. Of course, the content here is only for reference, and you should use it according to the actual situation. Let's have a look.
1、气源压力：确保驱动气压稳定。气体增压泵的驱动气源一般是在1.8-8bar压力范围，不建议它的驱动气源超过10bar，如果驱动气源过高，那么很大程度上会对泵体造成损伤，更有甚着会对操作人员造成人员伤亡。
1. Air supply pressure: ensure that the driving air pressure is stable. The driving air source of the gas booster pump is generally in the pressure range of 1.8-8bar. It is not recommended that its driving air source exceed 10bar. If the driving air source is too high, it will damage the pump body to a large extent, and even cause casualties to the operators.
2、被增压介质：确保无过多水分及杂质。
2. Pressurized medium: ensure there is no excessive moisture and impurities.
3、冷却时间：确保能够给气体增压泵足够的冷却休息时间。
3. Cooling time: ensure sufficient cooling rest time for the gas booster pump.
4、运作换向声：检查工作时的运作换向声是否正常，活塞往复是否有撞缸现象等，如发现有且自己不能处理的可向玖容厂家寻求帮助。
4. Operation reversing sound: check whether the operation reversing sound is normal during operation, whether the piston reciprocating has cylinder collision, etc. if it is found and cannot be handled by yourself, you can seek help from Jiurong manufacturer.
5、压力表显示：观察气体增压泵升压速度，观察压力表指针变化，是否存在掉压现象等，如发现有且自己不能处理的可向玖容厂家寻求帮助。
5. The pressure gauge shows: observe the boosting speed of the gas booster pump, observe the change of the pointer of the pressure gauge, whether there is pressure drop, etc. if it is found and cannot be handled by yourself, you can ask the manufacturer of Jiurong for help.
此外使用方要准备好被增压气体和管路，驱动气体和管路，高压气体的出口管路，按增压泵出厂时所带的说明书先固定增压泵，按照增压泵的各个进出口接头尺寸，连接好管路，检查是否耐压足够，接头是否有泄露等，检查完好后就可以进行增压测试了。
In addition, the user should prepare the pressurized gas and pipeline, the driving gas and pipeline, and the outlet pipeline of high-pressure gas. Fix the booster pump according to the instructions brought by the booster pump when it leaves the factory, connect the pipeline according to the size of each inlet and outlet connector of the booster pump, check whether the pressure resistance is sufficient, whether the connector has leakage, etc., and then carry out the pressurization test after checking it is intact.
气体增压泵选型方面：客户要根据自身的压力选择对应的增压比，客户可以自己说出自己的压力需求，突出气源压力、进气压力、输出压力需求、流量是多少，销售工程师才能更准确的帮您选型。
Selection of gas booster pump: customers should choose the corresponding boost ratio according to their own pressure. Customers can say their own pressure demand, focusing on the air source pressure, inlet pressure, output pressure demand, and flow. Sales engineers can help you select the type more accurately.
对现场使用环境方面：现场使用环境一定要干净，不能有太大的粉尘颗粒状，驱动气源及被增压介质水分不要含量太多，这样会大大降低泵的使用的寿命。
For the on-site use environment: the on-site use environment must be clean, and there must not be too much dust particles. The water content of the driving air source and the pressurized medium should not be too much, which will greatly reduce the service life of the pump.
对管路的要求：客户现场使用的时候一定要检测高压输出管道的密封严实型，采用的管道、阀门、压力表一定要大于增压泵输出的额定压力。大限度的保证人员的操作安全。
Requirements for pipelines: when customers use it on site, they must check the tightness of the high-pressure output pipeline, and the pipelines, valves and pressure gauges used must be greater than the rated pressure output by the booster pump. Ensure the operation safety of personnel to a great extent.
对压力容器的要求：
气体增压泵各部分承压件，特别是压力容器，一定要具有压力安全容器厂家生产的压压力安全容器检查报告。
Requirements for pressure vessels: the pressure parts of the gas booster pump, especially the pressure vessels, must have the pressure safety vessel inspection report produced by the pressure safety vessel manufacturer.
以上就是问题解答的相关内容了，开云在线官方能够帮助到大家，如对这一问题还存在任何疑问，都欢迎关注我们网站
//keonnected.com并咨询我们的工作人员，将竭诚为您服务。
The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website //keonnected.com And consult our staff, will serve you wholeheartedly.
