随着科技技术的不断进步，工业生产自动化越来越常见，气液增压泵作为自动化生产常见的一个气动配件，在很多行业中随处可见。在使用气液增压泵的时候，有些人会碰到气液增压泵没压力的情况。这到底是怎么回事呢?下面小编就带大家来了解一下引发
气液增压泵没压力的原因有哪些？
With the continuous progress of science and technology, industrial production automation is more and more common. As a common pneumatic accessory in automatic production, gas-liquid booster pump can be seen everywhere in many industries. When using the gas-liquid booster pump, some people will encounter the situation that the gas-liquid booster pump has no pressure. What the hell is going on? Now, what are the causes of no pressure in the gas-liquid booster pump?
1、气源压力供给是否正常。如气源压力不正常的话，将气源压力稳定在标准值。
1. Whether the air supply pressure supply is normal. If the air supply pressure is abnormal, stabilize the air supply pressure to the standard value.
2、油压表是否损坏。坏的油压表不能正常显示压力，造成了没有压力的假象，如是坏了的油压表将油压表更换。
2. Check whether the oil pressure gauge is damaged. The broken oil pressure gauge can not display the pressure normally, causing the illusion that there is no pressure. If it is broken, replace the oil pressure gauge.
3、油压表接头看看有没有生料带堵住。检查油压表过油孔是否被污渍堵住。
3. Check whether the joint of the oil pressure gauge is blocked by the raw material belt. Check whether the oil hole of the oil pressure gauge is blocked by dirt.
4、调压阀是否损坏及调速接头是不是出于没打开状态。如是调压阀坏了，更换调压阀;将调速接头正常打开看看。
4. Whether the pressure regulating valve is damaged and whether the speed governing connector is not opened. If the pressure regulating valve is broken, replace it; Open the speed governing connector normally.
5、液压油不足。检查气液增压泵液压油油量，如液压油不足的话，添加液压油至油筒二条标签线中即可。
5. Insufficient hydraulic oil. Check the hydraulic oil volume of the gas-liquid booster pump. If the hydraulic oil is insufficient, add hydraulic oil to the two label lines of the oil cylinder.
此外当增压泵突然停止工作时，应首先检查控制电压信号，如果信号正常，关断气源，确保泵内无压缩空气时，拧开右端盖上的限位阀螺帽，取出限位阀阀杆，检查密封圈是否离开沟槽，如果离开，把它推回沟槽，重开云在线官方装好螺帽，接通气源；
In addition, when the booster pump suddenly stops working, first check the control voltage signal. If the signal is normal, turn off the air source to ensure that there is no compressed air in the pump. Unscrew the limit valve nut on the right end cover, take out the limit valve stem, and check whether the seal ring leaves the groove. If it does, push it back to the groove, reinstall the nut, and connect the air source;
泵如果仍不动作，再关断气源，确保泵内无压缩空气时，更换电磁换向阀，接通气源；如增压泵仍不工作，请联系我们或就近代理或供应商。
If the pump still does not work, turn off the air source again. If there is no compressed air in the pump, replace the solenoid directional valve and connect the air source; If the booster pump still does not work, please contact us or the nearest agent or supplier.
当增压泵输出压力下降或达不到设定压力时，请检查管线是否有泄露，如无泄露现象，请检查气源压力是否正常，如一切均正常则考虑更换密封件。
When the output pressure of booster pump drops or fails to reach the set pressure, please check whether the pipeline leaks. If there is no leakage, please check whether the air source pressure is normal. If everything is normal, consider replacing the seals.
The reason why the gas-liquid booster pump has no pressure is explained here. If you have any questions about this, please come to our website //keonnected.com Get to know!
