气体增压泵是以压缩空气为动力源的一种活塞式增压泵，当进气时增压气控阀的阀芯往复切换工作，控制增压泵活塞以极快的速度作往复动作，随着输出压力的增高，活塞的往复速度减慢直至停止，此时，增压泵输出的压力恒定，能量消耗，各部件停止工作；无论何种原因造成保压回路压力下降，增压泵将自动启动，补充泄露压力，保持回路压力恒定。泵体全部采用铝合金及不锈钢制造，密封件均为进口品，驱动气压为8bar。
A gas booster pump is a piston type booster pump that uses compressed air as the power source. When the air is intake, the valve core of the booster gas control valve switches back and forth, controlling the booster pump piston to reciprocate at an extremely fast speed. As the output pressure increases, the reciprocating speed of the piston slows down until it stops. At this time, the output pressure of the booster pump is constant, the energy consumption is the lowest, and all components stop working; Regardless of the cause of the pressure drop in the pressure maintaining circuit, the booster pump will automatically start to supplement the leakage pressure and maintain a constant circuit pressure. The pump body is all made of aluminum alloy and stainless steel, with imported seals and a driving pressure of 8 bar.
1、维护简单：增压泵的零件及密封少，维护简单且成本低着一起复增压。
1. Easy maintenance: The booster pump has fewer parts and seals, making it easy to maintain and cost-effective for re pressurization.
2、性价比高：增压泵具有输出性能高而成本低的特性。
2. High cost-effectiveness: Booster pumps have the characteristic of high output performance and low cost.
3、可调性强：增压泵输出压力和流量都由驱动气体的压力调节阀准确地调节。调节驱动气压，使气压管道增压泵的输出压力在预增气压和输出压力之间精确调整。
3. Strong adjustability: The output pressure and flow rate of the booster pump are accurately adjusted by the pressure regulating valve that drives the gas. Adjust the driving air pressure to accurately adjust the output pressure of the pneumatic pipeline booster pump between the pre increased air pressure and the maximum output pressure.
4、输出压开云在线官方：气动液体管道增压泵的工作压力可达到，气动气体管道增压泵的工作压力可达到。
4. High output pressure: The maximum working pressure of the pneumatic liquid pipeline booster pump can be reached, while the maximum working pressure of the pneumatic gas pipeline booster pump can be reached.
5、材质优良：增压泵高压部分材质为硬质铝合金。高压柱塞材质为不锈钢。并采用双层密封。关键部位材质可以根据介质性制选配。
5. Excellent material: The high-pressure part of the booster pump is made of hard aluminum alloy. The high-pressure plunger material is stainless steel. And adopt double layer sealing. The materials of key parts can be selected according to the medium properties.
