空气增压泵工作时候，要先对泵内施加一个很小的作用力，当泵内的活塞受到作用力后会生成—个高压 ，通过入气孔处的换向阀 ，增压泵就可以不断的运动，再由一个控制阀控制高压活塞连续的将水排出。当主要的驱动系统和液体系统之间达到气压的均衡时，增压泵就能停止工作，反之增压泵就会继续工作，这就是空气增压泵的工作规律。
When the air Booster pump is working, a small force should be applied to the pump first. When the piston in the pump receives the force, a high pressure will be generated. Through the reversing valve at the air inlet, the Booster pump can move continuously, and then a control valve controls the high-pressure piston to discharge water continuously. When the air pressure between the main drive system and the liquid system is balanced, the Booster pump can stop working, otherwise the Booster pump will continue to work, which is the working law of the air Booster pump.
其实这种工作方式非常的像液体增压器，利用液体充满泵体，然后利用内部扇叶的飞快转动，带动泵体中的液体流动，由于惯性的关系液体会流向扇叶的边缘，同时扇叶源源不断的从入水口吸入液体，在这程中，扇叶上的液体不断的环绕在叶片上，在环绕运动中水会产生作用力给扇叶，反过来扇叶会返还给液体个力度相同，方向不同的压力，这个作用力对水产生做功，使水能够连续的得到能量流入泵体。
In fact, this working method is very similar to a liquid booster, which fills the pump body with liquid and then uses the rapid rotation of the internal fan blades to drive the liquid flow in the pump body. Due to inertia, the liquid flows to the edge of the fan blades, and the fan blades continuously suck in liquid from the inlet. In this process, the liquid on the fan blades continuously surrounds the blades, and during the surrounding movement, water will generate force to the fan blades, In turn, the fan blades will return pressure to the liquid with the same force but different directions, which produces work on the water, allowing it to continuously receive energy and flow into the pump body.
空气增压泵的工作方式大多都是利用压力的不平衡或者相互作用力的规律，来实现泵的重复运动的效果，气体驱动的部件大部分采用铝合金制造，液体驱动的部件也大多采用不锈钢材料，保证了空气泵在使用上的安全和长久性。空气增压泵是利用大面积活塞端的低压气体驱动从而产生小面积的活塞端高压气体。
The working mode of air Booster pump is mostly to use the imbalance of pressure or the law of interaction force to achieve the effect of repeated movement of the pump. Most of the gas driven parts are made of aluminum alloy, and most of the liquid driven parts are made of stainless steel, which ensures the safety and durability of the air pump in use. The air Booster pump is driven by the low-pressure gas at the piston end of a large area to produce high-pressure gas at the piston end of a small area.
增压泵不断的进行往复工作，输出压力越大，泵的往复运动速度便会减慢直到停止。泵在此时输出的压力恒定 能量消耗达到 ，各部件停止运动。可以进行调节输入压力使得输出压力得到相应的无级调整。这样的证明能够表明空气增压泵具有输出性能高且成本低这一特点。
The Booster pump continuously performs reciprocating work. The higher the output pressure, the slower the reciprocating speed of the pump will be until it stops. At this point, the pump outputs a constant pressure and consumes the lowest energy, causing all components to stop moving. The input pressure can be adjusted to achieve corresponding stepless adjustment of the output pressure. Such proof can show that the air Booster pump has the characteristics of high output performance and low cost.
在工作中，它可以实现将工作系统中的空气压力提高至 2-5倍 而实现这一点仅仅需要将工作系统中的压缩空气作为气源。由于局部压缩空气压力不足这一问题困扰了人们很长时间，从而专门针对为解决而设计制造出空气增压泵。它的特点在于当达到所设定的压力时，无需电源，不会额外增加任何能量的消耗。这一点上很大的节省了成本，被多次在需要防爆的领域上使用。
In work, it can increase the air pressure in the working system to 2-5 times, which only requires the compressed air in the working system as the air source. The problem of insufficient local compressed air pressure has puzzled people for a long time, so the air Booster pump is specially designed and manufactured to solve it. Its biggest feature is that when the set pressure is reached, there is no need for power and no additional energy consumption. This greatly saves costs and has been used multiple times in areas that require explosion protection.
This article is dedicated by the friendship of gas Booster pump. For more information, please click: //keonnected.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned
