开云在线官方

网站公告:

新闻中心

开云在线官方(中国)有限公司官网

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址://keonnected.com

业内资讯

当前位置:首页 - 新闻中心 - 业内资讯 - GPSQ气体增压泵的在使用上

GPSQ气体增压泵的在使用上具备的优势

发布时间:2018-01-04 16:15:55   发布人://keonnected.com
1、  驱动介质:多种气体驱动:压缩空气、液化氮气和管道氮气、水蒸气。
1. Driving medium: Various kinds of gas drive: compressed air, liquefied nitrogen and pipeline nitrogen, water vapor.
2、  输出流量大:只需0.3-0.69MPa压缩空气驱动就可取得较大的输出流量。
2. Large output flow: only 0.3-0.69MPa compressed air drive can achieve a larger output flow.
3、主动保压:作业时,迅速往复作业,跟着输出压力挨近设定压力值时泵的往复运动速度减慢直至中止。并保持这个压力,此时耗费能量很小,无热量发生, 无零件运动。当压力平衡打破后,气动增压泵主动开始作业到下一个平衡。
3. Active Pressure Maintenance: During operation, the reciprocating speed of the pump slows down until it stops when the output pressure is close to the set pressure value. And maintain this pressure, at this time energy consumption is very small, no heat generation, no part movement. When the pressure balance is broken, the pneumatic booster pump actively starts operation to the next balance.
4、原料优秀:高压部分原料为不锈钢。高压柱塞原料为不锈钢,并采用双层密封。
4. Excellent raw materials: Stainless steel is the raw material of high-pressure part. The raw material of high pressure plunger is stainless steel, and double-layer seal is adopted.
5、保护简略:GRPS气动增压泵的零件及密封少,保护简略且本钱低。相同系列泵的所有"O"型圈,修理包易损部件可相互替换,大大降低了修理本钱。气动增压泵出厂前已加注光滑剂,作业时无需外部光滑。
5. Brief protection: GRPS pneumatic booster pump has few parts and seals, simple protection and low cost. For all O-rings of the same series of pumps, the vulnerable parts of the repair kit can be replaced with each other, which greatly reduces the cost of repair. The pneumatic booster pump has been injected with smoothing agent before leaving the factory, and no external smoothing is needed during operation.
气体增压泵
典型的使用范围:
Typical scope of use:
1、气密性检测:如航空铸件、元件检测、发动气缸的密封检测;空调管路、暖风芯、气缸密封、汽车制动系统和其它设备;泵体及阀门:气体密封耐压测验及水中冒泡试验;安全阀检测;毛细管检测;
1. Air tightness testing: such as airborne casting, component testing, starting cylinder sealing testing; air conditioning pipeline, warm air core, cylinder sealing, automobile brake system and other equipment; pump body and valve: gas seal pressure test and water bubbling test; safety valve testing; capillary testing;
2、充气:蓄能器充氮气;高压气源:如校验仪器的高压气源;飞机轮胎充气;高压氧气、氦气、氮气、空气、规范气体充装以及昂贵气体的回收充气;气弹簧充气
2. Inflation: accumulator nitrogen charging; high-pressure gas source: such as high-pressure gas source of calibration instrument; aircraft tire inflation; high-pressure oxygen, helium, nitrogen, air, standard gas filling and recovery of expensive gas inflation; gas spring inflation
3、高压气源:出产动力、流水线检测之用;等静压机;可提供模拟试验高压气源;高压露点仪检测高压气源;渗透试验
3. High Pressure Gas Source: Used for Power Generation and Pipeline Detection; Isostatic Press; High Pressure Gas Source for Simulated Test; High Pressure Dew Point Meter for High Pressure Gas Source Detection; Permeation Test
新闻推荐:
气压增压装置有哪些? 2022-07-01
气动增压泵在生产制作中应该注意什么? 2022-06-23
气体增压泵气压排气高怎么回事? 2022-06-14
气气增压泵是以压缩空气为主! 2022-06-07
水下增压泵在水下生产系统中的使用 2022-05-31
气体增压系统的清洗需要注意什么? 2022-05-24
气体增压泵的使用步骤要做好哪些? 2022-05-18
气体增压泵的安装步骤介绍 2022-05-13
气体增压泵使用注意事项标准 2022-05-04
气体增压泵使用怎样才能达成有效配合? 2022-03-22

13188935873