The gas-liquid booster pump continuously discharges gas through the high-pressure piston controlled by the one-way valve. The outlet pressure of the gas-liquid booster pump is related to the air driving pressure. The working medium of pneumatic liquid booster pump can be water, with high reliability, maintenance free and long service life. The pneumatic liquid booster pump is a plunger pump. When working, the booster pump works quickly and again. When the output pressure is close to the set pressure, the reciprocating speed of the pump slows down until it stops. At this time, the pump output pressure is constant, the energy consumption is low, and the parts stop moving.

　　气动液体增压系统依据客户的实践需求，气动液体增压泵，油箱（水箱）和部件组装在管状框架或封锁的箱体内，构造为构造紧凑，运用便当。压力调理器，压力表，阀门等都是面板装置的。能够经过设置驱动气压调理器来调理输出压力。到达设定压力时泵自动中止，压力降落时恢复。

　　According to the practical needs of customers, the pneumatic hydraulic booster pump, oil tank (water tank) and components are assembled in the tubular frame or sealed box. The structure is compact and easy to use. Pressure regulators, pressure gauges, valves, etc. are panel devices. The output pressure can be regulated by setting the driving air pressure regulator. When the set pressure is reached, the pump will stop automatically and resume when the pressure drops.

　　气动液体增压系统设备的技术参数和组成，液体工作压力在0-640MPA可自在调理，介质通常为水或油。气动液体增压系统采用单气控不均衡气体均衡气体分配阀完成泵的自动往复运动。泵体局部全部采用铝合金制造，铝合金部件经过加工，氧化成黑色，确保产品外观美观，永不生锈。该泵的全套密封件均采用进口优质产品，确保泵的性能。

　　The technical parameters and composition of the pneumatic liquid pressurization system equipment. The liquid working pressure can be adjusted freely at 0-640mpa, and the medium is usually water or oil. The pneumatic liquid pressurization system uses a single air control unbalanced gas equalizing gas distribution valve to complete the automatic reciprocating motion of the pump. All parts of the pump body are made of aluminum alloy. The aluminum alloy parts are processed and oxidized to black to ensure beautiful appearance and never rust. The whole set of seals of the pump are imported high-quality products to ensure the performance of the pump.

　　设备组要由油箱，气动液体增压泵和管道站组成，包括气压表，高压表，调压阀，低压开关，高压开关组成。预留接口尺寸以及驱动气体入口尺寸通常设置为直径为12mm的直插接式头。

　　The equipment group shall be composed of oil tank, pneumatic liquid booster pump and pipeline station, including air pressure gauge, high pressure gauge, pressure regulating valve, low pressure switch and high pressure switch. The size of the reserved interface and the size of the driving gas inlet are usually set as 12mm diameter straight plug-in head.

　　设备操作扼要操作：手动控制：衔接设备和空压机→调理压力调理阀→翻开高压开关→翻开低压开关，启动实验→加压到所需压力，关闭。开端坚持压力→坚持压力完成，关闭每个开关，实验室完成。喷涂盒子的表面面。每个液压部件的衔接是牢靠的，并且不允许漏油。衔接管由不锈钢制成。

　　Brief operation of equipment operation: manual control: connect the equipment and air compressor → regulate the pressure regulating valve → turn on the high-pressure switch → turn on the low-pressure switch, start the experiment → pressurize to the required pressure and close. Start holding on to pressure → hold on to pressure completion, turn off each switch and the laboratory completes. Spray the surface of the box. The connection of each hydraulic component is reliable and no oil leakage is allowed. The connecting pipe is made of stainless steel.

　　以上的精彩内容由气液增压泵厂家提供技术支持，本站还有很多的精彩内容等您查看，欢迎您继续关注我们的网站：//keonnected.com 期待您的关注！

　　The above wonderful contents are supported by the gas-liquid booster pump manufacturer. There are many wonderful contents waiting for you to check. Welcome to continue to follow our website: //keonnected.com and look forward to your attention!