1. The anti-wear hydraulic oil used for gas-liquid booster cylinder is isovg68.

2、一般气液增压缸在使用50万次以上或半年以上的时间的时候，建议您将缸中的液压油更换一次，具体的液压油更换方法，请咨询森拓的相关技术人员。

2. Generally, when the gas-liquid booster cylinder is used for more than 500000 times or more than half a year, it is recommended that you replace the hydraulic oil in the cylinder once. Please consult the relevant technical personnel of Suntop for the specific hydraulic oil replacement method.

3、气液增压缸在开始接入气路前，要把管路及元件内的灰尘等杂物清除干净，不然杂物会影响增压缸的使用寿命。

3. Before the gas-liquid booster cylinder is connected to the gas circuit, the dust and other debris in the pipeline and components should be removed, otherwise the debris will affect the service life of the booster cylinder.

4、为避免气液增压缸压力过大破坏您的模具或工件，请在增压段进气口处加装一减压阀，这样就能有效保护您的模具或工件了。

4. In order to avoid damaging your die or workpiece due to excessive pressure of the gas-liquid booster cylinder, please install a pressure reducing valve at the air inlet of the booster section, so as to effectively protect your die or workpiece.

5、为确保气液增压缸工作的稳定性，建议您尽可能在三联件与缸之间并联加装一个储气罐，另请在缸的前端加装有效的空气处理元件(三点组合)，并按时加油润滑及排水处理。

5. In order to ensure the working stability of the gas-liquid booster cylinder, it is recommended that you install an air tank in parallel between the triplet and the cylinder as far as possible. In addition, you should install an effective air handling element (three-point combination) at the front end of the cylinder, and add oil lubrication and drainage treatment on time.

6、气液增压缸的工作环境温度为0--60℃，以及不要在工作环境特为复杂的环境内使用(如有化学物质的腐蚀环境)，对于不同的工作环境需要，可以跟们的技术人员进行定制。

6. The working environment temperature of the gas-liquid booster cylinder is 0-60 ℃, and it should not be used in the particularly complex working environment (such as the corrosive environment of chemical substances). For different working environment needs, it can be customized with our technicians.