开云在线官方

网站公告:

新闻中心

开云在线官方(中国)有限公司官网

电话:0531-69951198

邮箱:jingtuolt@163.com

传真:0531-69951198

地址:济南市历城区祝甸北路2号院

网址://keonnected.com

业内资讯

当前位置:首页 - 新闻中心 - 业内资讯 - 气液增压泵工业原理动态分

气液增压泵工业原理动态分析

发布时间:2020-04-19 15:30:49   发布人://keonnected.com
工作原理类似于压力增压器,对大径空气驱动活塞施加一个很低的压力,当此压力作用于一个小面积活塞上时,产生一个高压。通过一个二位五通气控换向阀,增压泵能够实现连续运行。
The working principle of the gas-liquid booster pump is similar to that of the pressure supercharger. It exerts a very low pressure on the large diameter air driven piston. When the pressure acts on a small area piston, a high pressure is generated. Through a two position five ventilation control directional valve, the booster pump can realize continuous operation.
工业原理
Industrial principles
由单向阀控制的高压柱塞不断的将液体排出,增压泵的出口压力大小与空气驱动压力有关。当驱动部分和输出液体部分之间的压力达到平衡时,增压泵会停止运行,不再消耗空气。当输出压力下降或空气驱动压力增加时,增压泵会自动启动运行,直到再次达到压力平衡后自动停止。
The high pressure plunger controlled by one-way valve continuously discharges the liquid, and the outlet pressure of booster pump is related to the air driving pressure. When the pressure between the driving part and the liquid output part reaches balance, the booster pump will stop running and no longer consume air. When the output pressure decreases or the air driving pressure increases, the booster pump will start and run automatically until it reaches the pressure balance again.
采用单气控非平衡气体分配阀来实现泵的自动往复运动,泵体气驱部分采用铝合金制造。接液部分根据介质不同选用碳钢或不锈钢,泵的全套密封件均为进口优良产品,从而保证了气液增压泵的性能。
The single gas control non-equilibrium gas distribution valve is used to realize the automatic reciprocating motion of the pump, and the gas drive part of the pump body is made of aluminum alloy. Carbon steel or stainless steel is selected according to different media for the liquid receiving part. The whole set of seals of the pump are imported excellent products, so as to ensure the performance of the gas-liquid booster pump.
气体增压泵B系列为二级增压泵,可以将极低压力的气体增至很高的压力,驱动气压≤7bar,可增至640Mpa。该系列泵的换向方式与德科G系列完全相同,与G系列相比,他能够在相同空气驱动压力下产生2倍的输出压力,整台泵全部采用铝合金及不锈钢制造。在泵的气驱部分该系列需用润滑型气体,以便让密封和其他内部零件得到润滑,该系列泵的驱动活塞直径为160mm。
The gas booster pump series B is a two-stage booster pump, which can increase the gas with extremely low pressure to a very high pressure. The driving air pressure ≤ 7bar can be increased to 640mpa. The reversing mode of this series of pumps is exactly the same as that of Deco G series. Compared with G series, it can produce twice the output pressure under the same air driving pressure. The whole pump is made of aluminum alloy and stainless steel. In the gas drive part of the pump, the series needs lubricating gas to lubricate the seal and other internal parts. The diameter of the driving piston of the series pump is 160mm.
新闻推荐:
气压增压装置有哪些? 2022-07-01
气动增压泵在生产制作中应该注意什么? 2022-06-23
气体增压泵气压排气高怎么回事? 2022-06-14
气气增压泵是以压缩空气为主! 2022-06-07
水下增压泵在水下生产系统中的使用 2022-05-31
气体增压系统的清洗需要注意什么? 2022-05-24
气体增压泵的使用步骤要做好哪些? 2022-05-18
气体增压泵的安装步骤介绍 2022-05-13
气体增压泵使用注意事项标准 2022-05-04
气体增压泵使用怎样才能达成有效配合? 2022-03-22

13188935873