(1) 石油、煤油、柴油、含5%可溶油的水。(2) 水。(3) 基抗燃液压油以及与UHMWPE动态和合成橡胶静态密封圈相容的石油基溶剂。(4) 石油基溶剂、氯化了的溶剂、氟化了的溶剂。使用，双，乙醇和Freon22。(5) Skydrol和Aerosafe液压油、和一些乙醇。如果用二元乙丙橡胶(例如51331-MDTV-5)代替合成橡胶静态密封圈，也可适用于这些液体。(6) 去离子水。
(1) Petroleum, kerosene, diesel, water containing 5% soluble oil. (2) Water. (3) Base fire-resistant hydraulic oil and petroleum based solvent compatible with UHMWPE dynamic and synthetic rubber static sealing rings. (4) Petroleum based solvent, chlorinated solvent, fluorinated solvent. Use, double, ethanol and freon22. (5) Skydrol and aerosafe hydraulic oil, and some ethanol. If ethylene propylene diene rubber (e.g. 51331-mdtv-5) is used instead of synthetic rubber static sealing ring, it can also be applied to these liquids. (6) Deionized water.
气液增压泵的分析
Analysis of gas liquid booster pump
唐山智锦阳科技有限公司主营产品有:气动增压泵，流体输送泵，液驱增压泵。主要产品有两大类：一类为气液增力缸及气液增力缸式冲压设备，另一类为气动增压泵及气动增压试验设备。
The main products of Tangshan zhijinyang Technology Co., Ltd. are: pneumatic booster pump, fluid transfer pump and liquid drive booster pump. The main products are divided into two categories: one is gas-liquid booster cylinder and gas-liquid booster cylinder stamping equipment, and the other is pneumatic booster pump and pneumatic booster test equipment.
气液增压泵是一种复式柱塞泵，利用大面积活塞的低气压产生小面积活塞的高液压。电动试压泵属于往复式柱塞泵，电机驱动柱塞，带动滑块运动进而将水注如被试压物体，使压力逐渐上升。该机由泵体、开关、压力表、水箱、电机等组成。那它们区别与个自的特点怎么样呢。
Gas liquid booster pump is a compound piston pump, which uses the low air pressure of large area piston to produce the high hydraulic pressure of small area piston. The electric pressure test pump is a reciprocating plunger pump. The motor drives the plunger to drive the slider to move, and then injects water into the object to be tested to gradually increase the pressure. The machine is composed of pump body, switch, pressure gauge, water tank, motor, etc. What is the difference between them and the characteristics of self.
主要产品有两大类：一类为气液增力缸及气液增力缸式冲压设备，另一类为气动增压泵及气动增压试验设备。
The main products are divided into two categories: one is gas-liquid booster cylinder and gas-liquid booster cylinder stamping equipment, and the other is pneumatic booster pump and pneumatic booster test equipment.
保持良好的排气和通风、远离和热源。泵的排气中可能含有固体物，不要将排气口对着工作区或者人，以免造成人身伤害。当输送和有毒的流体时，气动液体增压泵报价，请将排口接到远离工作区的安全地方。
Keep good exhaust and ventilation, away from and heat sources. The exhaust of the pump may contain solids. Do not face the exhaust port to the working area or people to avoid personal injury. When conveying and toxic fluids, please connect the discharge port to a safe place away from the working area.
流体的高压可能会导致严重的人身伤亡和财产损失，请不要在泵加压时，对泵及料管系统进行任何的维修工作，气动液体增压泵价格，如要做维修时，先切断泵的进气，气动液体增压泵厂家，慢慢松开连接的各管道接头。
The high pressure of fluid may cause serious personal injury and property loss. Please do not carry out any maintenance work on the pump and material pipe system when the pump is pressurized. The price of pneumatic liquid booster pump. If maintenance is required, first cut off the air inlet of the pump. The manufacturer of pneumatic liquid booster pump shall slowly loosen the connected pipe joints.
为了保证泵的寿命，建议驱动气压≤8bar此系列的驱动活塞直径为160mm。保证所有接触输送体的部件不会被输送的流体腐蚀损坏，并且要保证所有的操作人员熟悉操作使用和掌握泵的安全使用注意事项，必要的话，配给必需的防护用品。
In order to ensure the service life of the pump, it is recommended that the driving air pressure ≤ 8bar. The diameter of the driving piston of this series is 160mm. Ensure that all parts contacting the conveyor will not be corroded and damaged by the transported fluid, and ensure that all operators are familiar with the operation and use and master the precautions for safe use of the pump, and provide necessary protective articles if necessary.
The above wonderful content is what Xiaobian provides for you today. More wonderful content comes from: for details of gas-liquid booster pump, please click our website to pay attention to: //keonnected.com
