1、不能用煤油、酒精或是其它腐蚀性液体，以防液压器元件、油箱等部件受到腐蚀，影响液压器的正常使用。
1. Kerosene, alcohol, or other corrosive liquids cannot be used to prevent corrosion of hydraulic components, fuel tanks, and other components, which may affect the normal use of the hydraulic system.
2、清洗气体增压系统时，液压泵运转和清洗介质加热应同时进行。因为，清洗油液的温度为五十摄氏度到八十摄氏度时，系统内的橡胶渣时很容易被除掉的。
2. When cleaning the gas boosting system, the operation of the hydraulic pump and the heating of the cleaning medium should be carried out simultaneously. Because when the temperature of the cleaning oil is between 50 ° C and 80 ° C, the rubber residue in the system is easily removed.
3、液压泵工作的时候进行间歇性的运转可以提高清洗效果。
3. Intermittent operation of the hydraulic pump during operation can improve the cleaning effect.
4、我们应该在气体增压系统的清洗油路的回路上安装过滤器，这样可以过滤掉系统内大部分的杂质。
4. We should install filters on the cleaning oil circuit of the gas boosting system, which can filter out most of the impurities in the system.
5、清洗液压泵的时间一般在四十八小时到六十小时之间，这是由系统的复杂程度和污染程度等因素决定的。
5. The cleaning time of hydraulic pumps is generally between 48 to 60 hours, which is determined by factors such as the complexity and pollution level of the system.
6、清洗结束时，不要立即使液压泵停止运转，应该使其持续运转直到液压泵气温恢复正常，这样可以防止外界湿气使内部器件生锈。
6. At the end of cleaning, do not immediately stop the hydraulic pump from running. It should be kept running until the temperature of the hydraulic pump returns to normal, which can prevent external moisture from rusting internal components.
7、清洗完气体增压系统后要及时把回路内的清洗油去除干净。
7. After cleaning the gas boosting system, the cleaning oil in the circuit should be promptly removed.
为了延长气体增压系统的使用寿命，以后再清洗时请一定要注意上面说的这些方面。
In order to extend the service life of the gas boosting system, please pay attention to these aspects mentioned above when cleaning in the future.
This article is dedicated to the friendship of gas booster pumps. For more relevant knowledge, please click on: //keonnected.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned
