1.正确选型：
1. correct selection:
气体增压泵分为气体增压泵和气液增压泵两种，气体增压泵可以对空气、氮气、氧气、氢气等气体增压，如果为腐蚀性气体，如 H2S,SO2等气体，在选型时客户应主动说明。气液增压泵适用于水、液压油等液体增压，如腐蚀液体也需要特殊说明。正确选型是气动增压泵稳定运行的前 提。
Gas booster pump for gas booster pump booster pump and gas-liquid two, gas booster pump booster can of air, nitrogen, oxygen, hydrogen and other gases, if corrosive gases, such as H2S, SO2 and other gases, in the selection of customers should take the initiative to explain. Liquid gas booster pump is suitable for water, hydraulic oil and other liquid pressurization, such as corrosion liquid also need special explanation. The correct selection is the premise of the stable operation of the pneumatic booster pump.

2.过滤要求：
2. filtration requirements:
气动增压泵动力源为压缩空气，要求气源洁净，颗粒要求在5um以下，一般工厂气源比较脏，如果不经过滤直接接到泵上，长期使用，泵会长期积污，会导致单向阀失灵、密封圈磨损严重。
Pneumatic booster pump power source is compressed air, clean air requirements, particle requirements under 5um, the general plant source is dirty, if not filtered directly to the pump, the pump will be used for a long time, long-term pollution, will cause the one-way valve failure, the sealing ring wear serious.
3.安装要求：
3. installation requirements:
安装时驱动气源好使用PU风管，原因容易安装，操作方便，管内不会生锈，如果使用金属管，安装前好用压缩空气吹扫，避免焊渣 吹到换向阀内，将换向阀卡死。气动增压泵可以垂直安装或水平安装，在条件允许的情况下，好垂直安装，垂直安装能延长密封件的使用寿命。
When installing the drive source the best use of the PU duct because of easy installation, convenient operation, no rust in the tube, if the metal tube, the best pre installed with compressed air purge, avoid welding slag blown to the valve, the valve stuck. Pneumatic booster pump can be installed vertically or horizontally. It is better to install vertically when conditions permit. Vertical installation can prolong the service life of the seal.
以上就是今天的介绍,如果您想了解开云在线官方产品的更多信息,欢迎您电话咨询,我们定会为您提供详细的产品信息。
The above is today's introduction, if you want to know more about our products, you are welcome to call us, we will provide you with detailed product information.