空气增压泵，简单点来说就是用来提升气源压力的一种设备，当然还能够用于气压测试、气密性检测等。产品依据倍数可分为2/3/4/5等倍数，倍数越大，高压后流量越小。
Air booster pump, in a nutshell, is a kind of equipment used to raise the pressure of air source. Of course, it can also be used for air pressure testing, air tightness testing, etc. Products can be divided into 2/3/4/5 multiples according to multiples. The larger the multiples, the smaller the flow rate after high pressure.
空气增压泵为一种以紧缩空气为动力源的一种活塞式增压泵。当进气时增压气控阀的阀芯往复切换工作，控制增压阀活塞以极快的速度作往复动作。随着输出压力增大，活塞的往复速度减慢直到中止，此时，增压泵输出压力到达恒定，各部件中止工作耗能到达低。不论是什么缘由招致保压回路压力降落，增压泵都会自动启动补充压力以到达回路压力恒定的效果。
The air booster pump is a piston type booster pump with compressed air as its power source. When intake air, the valve core of the booster gas control valve is switched back and forth, and the piston of the booster valve is controlled to move back and forth at a very fast speed. With the increase of the output pressure, the reciprocating speed of the piston slows down until it stops. At this time, the output pressure of the booster pump reaches a constant value, and the energy consumption of each component stops working reaches a minimum. Whatever the cause of pressure drop in the pressure retaining circuit, the booster pump will automatically start the supplementary pressure to achieve the effect of constant pressure in the circuit.
空气增压泵产品特性有哪些？
What are the characteristics of air booster pump products?
1、性价比高：相关于采购一台大的空气紧缩机（本钱高噪音大），采用空气增压泵来进步气源压力的方式更具性价比。
1. High performance-price ratio: Relevant to the purchase of a large air compressor (high cost and noise), it is more cost-effective to use air booster pump to improve air pressure.
2、操作平安：采用气体驱动,无电弧及火花,可在风险场所运用。
2. Safe operation: gas-driven, no arc and spark, can be used in risk areas.
3、自动保压：无论何种缘由形成的保压回路压力降落,增压泵都将自动启动,补充泄露压力,坚持回路压力稳定。
3. Automatic Pressure Maintenance: Whatever the reason for the pressure drop in the pressure retaining circuit, the booster pump will automatically start up, supplement the leakage pressure, and adhere to the stability of the pressure in the circuit.
4、输出范围广：仅需求较小气压就能平稳工作,此时取得小流量,调理进气量后可取得不同流量。
4. Wide range of output: Only a small pressure is required to work smoothly, at which time the minimum flow can be obtained, and different flow can be obtained after adjusting the intake.
5、输出压开云在线官方：较大气体输出压力可达80Mpa。
5. High output pressure: the maximum gas output pressure can reach 80 Mpa.
6、易于调理：在泵的压力范围内,调理调理阀，从而调理输入气压来控制，输出气压，液压得到调整。
6. Easy to adjust: In the pressure range of the pump, adjust the adjusting valve, so as to adjust the input air pressure to control, output air pressure, hydraulic pressure has been adjusted.
7、应用灵敏：选用不同型号的泵,可取得不同的压力区域。
7. Application sensitivity: Different types of pumps can be selected to obtain different pressure areas.
8、维护简单：泵能完成其它气驱泵相同的工作,但其零件及密封少,维护简单。
8. Simple maintenance: The pump can accomplish the same work as other gas drive pumps, but its parts and seals are few, and maintenance is simple.
9、适用范围广：工作介质可为紧缩空气、氮气、水蒸气及自然气等,而且牢靠性高,免维护和寿命长。
9. Wide scope of application: working medium can be compressed air, nitrogen, water vapor and natural gas, with high reliability, maintenance-free and long service life.
空气增压泵和空气增压系统有什么差异？
What is the difference between an air booster pump and an air booster system?
空气增压泵为空气增压系统的一局部，完好的空气增压系统还包括各种配件如储气罐、排水阀、平安阀、球阀、压力表、高压管路、减压阀等。同规格状况下，空气增压泵价钱较空气增压系统要实惠很多。
The air booster pump is a part of the air booster system. The intact air booster system also includes various accessories such as gas storage tank, drainage valve, safety valve, ball valve, pressure gauge, high pressure pipeline, pressure relief valve, etc. Under the same specifications, the price of air booster pump is much more affordable than that of air booster system.
空气增压泵应用场所阐明
Application Site of Air Supercharging Pump
普通紧缩机进步空气压力、气控阀气动执行器、数控机床夹紧安装 、气动打捆机、 喷码机、三坐标丈量仪、 气动打标机、 气缸夹紧力缺乏等场所；阀门气密性检测、压力容器检测、空调盘管检测、储气罐内气体的恒定补充。
Common compressor improves air pressure, pneumatic actuator of pneumatic control valve, clamping installation of numerical control machine tool, pneumatic bundler, jet printer, coordinate measuring instrument, pneumatic marking machine, lack of clamping force of cylinder and other places; valve tightness testing, pressure vessel testing, air conditioning coil testing, constant supplement of gas in gas storage tank.
1、不能配置大口径气缸，但输出力又必需确保。
1. Large caliber cylinder can not be installed, but the output force must be ensured.
2、气控式远间隔操作，必需增压以补偿压力损失。
2. Air-controlled remote operation requires pressurization to compensate for pressure loss.
3、气路中个别或局部安装需用高压。
3. High pressure is required for individual or partial installation in the air passage.
4、用于各种气体充装。
4. Used for filling various gases.
5、用于气密性检测。
5. For air tightness testing.
6、开云在线官方缩短向气罐内充气至一定压力的时间。
6. We hope to shorten the time of charging to a certain pressure in the gas tank.
7、需求进步联动缸的液压力。
7. Hydraulic pressure of linkage cylinder with progressive demand.
8、工厂主气路压力降落，不能保证气动安装的低运用压压力时，应用增压泵提供高压气体，以维持气动安装正常工作等。
8. When the pressure of the main air passage of the factory falls and the lowest operating pressure of the pneumatic installation cannot be guaranteed, the pressurized pump shall be used to provide high-pressure gas to maintain the normal operation of the pneumatic installation, etc.
Thank you for your reading. For more information and questions, please click: //keonnected.com. We will continue to work hard to provide you with services. Thank you for your support.
