The principle of gas-liquid supercharger and gas-liquid booster pump is that the large piston pushes the small piston, which enlarges the liquid pressure due to the area difference, f = but the essential difference between the two is that the gas-liquid booster is generally a single reciprocating motion, discontinuous movement, there is no one-way valve at the inlet and outlet, the external oil cup is generally used for pressure pulse, stamping and other occasions; the gas-liquid booster pump can be connected by its own directional valve Compressed air continuous reciprocating movement, inlet and outlet equipped with one-way valve, liquid continuous, commonly used for pressure detection.

气体增压泵利用大面积活塞端的低压气体驱动而产生小面积活塞端的高压流体。可用于压缩空气及其它气体，输出气压可通过驱动气压无级调节。输出流量大：只需0.3-0.8MPa压缩空气驱动就可获得较大的输出流量工作时，迅速往复工作，随着输出压力接近设定压力值时泵的往复运动速度减慢直至停止。并保持这个压力，此时消耗能量很小，无热气体增压泵量产生，无零件运动。当压力平衡打破后，气动增压泵自动开始工作到下一个平衡。

The gas booster pump uses the low pressure gas of large area piston end to drive and produce high pressure fluid of small area piston end. It can be used for compressed air and other gases. The output pressure can be adjusted steplessly by driving air pressure. Large output flow: only 0.3-0.8mpa compressed air drive can obtain large output flow. When working, it can quickly reciprocate. When the output pressure is close to the set pressure value, the reciprocating speed of the pump slows down until it stops. And maintain this pressure, at this time the consumption of energy is very small, no hot gas booster pump generated, no parts movement. When the pressure balance is broken, the pneumatic booster pump automatically starts to work to the next balance.

材质优良高压部分材质为不锈钢。高压柱塞材质为不锈钢，并采用双层密封。维护简单气动增压泵的零件及密封少，维护简单且成本低。相同系列泵的所有"O"型圈，维修包易损部件可相互替换，大大降低了维修成本。气动增压泵出厂前已加注润滑剂，工作时无需外部润滑。

The high pressure part is made of stainless steel. The high pressure plunger is made of stainless steel with double seal. Simple maintenance, less parts and seals of pneumatic booster pump, simple maintenance and low cost. All the "O" rings of the same series of pumps and the vulnerable parts of the repair kit can be replaced with each other, greatly reducing the maintenance cost. The pneumatic booster pump has been filled with lubricant before delivery, so external lubrication is not required during operation.

只有把上述所讲的内容设定好，我们的操作才算完成，如果您这边在后续的过程中有任何的问题，欢迎致电或者是在网站上边留言:气液增压泵//keonnected.com

If you have any problems in the follow-up process, please call or leave a message on the website: gas-liquid booster pump //keonnected.com