The main function of the compressed gas booster pump is to boost the pressure of the compressed gas for the second time. It is mostly used in the factory where the local air pressure is insufficient. There is no need to reform the gas pipeline or add a high-pressure air compressor. The utility model has the advantages of economy, safety, explosion-proof and low noise. The following small series of compressed gas booster pump in what circumstances to do with the gas tank, how to do with a simple introduction.

工厂压缩气体压力不足一般都会配置压缩气体增压泵，简单实用有用率。但是压缩气体增压泵的储气罐要怎么配置呢？这个就要看现场的压缩气体使用情况来定，一般分为瞬间耗气量，持久耗气量，一股一股耗气量等。

Factory compressed gas pressure is insufficient, generally will be equipped with compressed gas booster pump, simple and practical. But how to configure the gas storage tank of the compressed gas booster pump? This depends on the use of compressed gas on site, which is generally divided into instantaneous gas consumption, persistent gas consumption, one stream by one gas consumption, etc.

瞬间耗气量：这个一般多为阀门开关，气体炮等领域使用。特征为增压储气时间长，瞬间消耗大。这时压缩气体增压泵配备的罐体内的压缩气体，要达到设备所需瞬间消耗量，配备的罐体一般都不会太小，可以根据设备瞬间消耗来选择储气罐的大小。

Instantaneous gas consumption: This is usually used in valve switch, gas gun and other fields. It is characterized by long pressurization storage time and large instantaneous consumption. At this time, the compressed gas in the tank equipped with the compressed gas booster pump is generally not too small to reach the instantaneous consumption required by the equipment. The size of the gas storage tank can be selected according to the instantaneous consumption of the equipment.

持久耗气：这种情况多见于气体吹扫，着种情况下设备对气源要求是不断稳定的气压输出，选择多为气体增压泵流量来选型，气体增压泵型号流量大选择储气罐也就越大，流量小相应的储气罐也小。

Persistent gas consumption: this situation is more common in gas purging. In this case, the equipment requires constant and stable air pressure output for the gas source. The selection is mostly based on the flow of gas booster pump. The larger the flow of gas booster pump is, the larger the gas storage tank is, and the smaller the flow is, the smaller the corresponding gas storage tank is.

一股一股的耗气：这种多见与气缸，气动阀等使用。这种情况下设备使用压缩气体多为，消耗以下停以下。这种情况要看设备对压缩气体的消耗量，如果小的话可以不用储气罐，大的话可以配备小型储气罐。

One by one of the gas consumption: this common with the cylinder, pneumatic valve, etc. In this case, the compressed gas used by the equipment is mostly below consumption and below stop. In this case, it depends on the consumption of compressed gas by the equipment. If the equipment is small, it can be equipped with small gas storage tanks.

总之客户现场情况千变万化，实在掌握不好的话可以咨询菲恩特销售工程师，让销售工程师帮忙推荐。

In short, the customer's on-site situation is ever-changing. If you really don't have a good grasp of it, you can consult feinte's sales engineer and ask the sales engineer to help recommend it.