The gas booster pump is a kind of piston booster pump with compressed air as the power source. When air is introduced, the valve core of the booster air control valve switches back and forth to control the booster pump piston to perform reciprocating action at a very fast speed. With the increase of output pressure, the reciprocating speed of the piston slows down until it stops. At this time, the output pressure of the booster pump is constant, the energy consumption is low, and all components stop working; If there is no reason for the pressure drop in the pressure maintaining circuit, the booster pump will start automatically to supplement the leakage pressure, keep the circuit pressure constant, and the atmospheric driving pressure is 8bar.

气动增压泵一般用于产品气压测试、提升工厂局部气源压力等，在一次使用前，须详细阅读产品相关使用说明，切勿凭感觉操作。使用时，注意以下事项等，可用的更久。

Pneumatic booster pump is generally used for product air pressure test and increasing the local air source pressure of the factory. Before one use, read the relevant instructions of the product in detail, and do not operate by feeling. When using, pay attention to the following matters, which will be available for a longer time.

1、使用的环境粉尘不能太多，因为气动气体增压泵上的呼吸孔可能会把杂志吸入泵的腔体内6，进而可能会导致其上的密封圈机缸筒划伤等情况的发生，大大的缩减应有的使用寿命年限。

1. The use of environmental dust should not be too much, because the breathing hole on the pneumatic gas booster pump may suck the magazine into the cavity 6 of the pump, which may lead to scratches on the sealing ring and cylinder barrel, greatly reducing the due service life.

2、如有条件的，可通过加配油水分离器来达到过滤掉空气驱动气源中的杂质以及水分等，这对于延长综合使用年限都是很有帮助的。

2. If possible, add an oil-water separator to filter out impurities and moisture in the air driven air source, which is very helpful to prolong the comprehensive service life.

以上就是开云在线官方设备厂家为大家介绍相关内容，开云在线官方可以帮助到您，更多精彩内容可以直接在线联系客服

The above is the relevant content introduced by JingTuo fluid equipment manufacturer. I hope it can help you. For more wonderful content, you can directly contact customer service online